原先買了一塊adxl345加速規,也找到了相關函式庫可以用,可是跑範例code一直有問題呀…,後來看到這篇文章 ADXL345 – Not working,才知道這目前有bug,建議轉用另一塊MMA7660加速規!

相關訊息在intel developer zone 已經有詳盡的說明了,可以參照  MMA7660 3-Axis Digital Accelerometer


Python 官方範例

官方範例show的是整數與浮點數,sleep time 為0.5秒

import time, sys, signal, atexit
import pyupm_mma7660 as upmMMA7660

# Instantiate an MMA7660 on I2C bus 0
myDigitalAccelerometer = upmMMA7660.MMA7660(
					upmMMA7660.MMA7660_I2C_BUS, 
					upmMMA7660.MMA7660_DEFAULT_I2C_ADDR);


## Exit handlers ##
# This function stops python from printing a stacktrace when you hit control-C
def SIGINTHandler(signum, frame):
	raise SystemExit

# This function lets you run code on exit, including functions from myDigitalAccelerometer
def exitHandler():
	print "Exiting"
	sys.exit(0)

# Register exit handlers
atexit.register(exitHandler)
signal.signal(signal.SIGINT, SIGINTHandler)


# place device in standby mode so we can write registers
myDigitalAccelerometer.setModeStandby()

# enable 64 samples per second
myDigitalAccelerometer.setSampleRate(upmMMA7660.MMA7660.AUTOSLEEP_64)

# place device into active mode
myDigitalAccelerometer.setModeActive()

x = upmMMA7660.new_intp()
y = upmMMA7660.new_intp()
z = upmMMA7660.new_intp()

ax = upmMMA7660.new_floatp()
ay = upmMMA7660.new_floatp()
az = upmMMA7660.new_floatp()

while (1):
	myDigitalAccelerometer.getRawValues(x, y, z)
	outputStr = ("Raw values: x = {0}"
	" y = {1}" 
	" z = {2}").format(upmMMA7660.intp_value(x),
	upmMMA7660.intp_value(y),
	upmMMA7660.intp_value(z))
	print outputStr

	myDigitalAccelerometer.getAcceleration(ax, ay, az)
	outputStr = ("Acceleration: x = {0}"
	"g y = {1}"
	"g z = {2}g").format(upmMMA7660.floatp_value(ax),
	upmMMA7660.floatp_value(ay),
	upmMMA7660.floatp_value(az))
	print outputStr
	time.sleep(.5)